Why are my Pool Steps Turning Brown? [Detailed Guide]

Why are my Pool Steps Turning Brown? [Detailed Guide]

Brown pool steps are a common problem in many areas. Many people ask Why are my pool steps turning brown? Well, there can be many reasons for this. We’re going to explain all of them here. 

The main reason for pool steps turning brown is when the iron concentration in the pool water becomes too high. Calcium, in hard water areas, comes out of the solution. It mixes with the dirt and oils, and after that, it retains itself on steps in a brownish colour.

After reading this article, you will become familiar with all the reasons about Why are my Pool Steps Turning Brown? And also, with their most easy and popular techniques, you can overcome this problem easily. So, stay tuned.

Why are my Pool Steps Turning Brown?

With time your pool steps become stained, and you must know about the reasons for  Why are my Pool Steps Turning Brown? The brown colour indicates that something is going wrong with your pool. You have to check and overcome these problems.

There are many reasons why the pool steps turn in brown, but here we will tell you about the main reasons for this problem which are given below:

1- Addition of Pool Chemicals with Heavy Components

Sometimes, Pool chemicals have heavy components, which is why pool steps turn brown. The brown steps show iron in the water, which is something serious you cannot ignore.

Moreover, another possibility is the presence of Magnesium in the water, which can happen when metal is available in well water. One of the simplest solutions to this problem is to purchase a metal removal product. Apply it and wait for the results.

2- Algae Accumulation

Algae accumulation is one of the most common reasons that turn the pool steps into brown. You can prevent this problem by vacuuming the pool steps manually to remove them quickly. Do read this article if you are interested to check best pool vacuum cleaner for your pool.

Then, at that point, check the water balance by utilizing a fluid unit test. The alkalinity and pH level will guarantee your sanitizer will be compelling against the algae. Add the algaecide according to the directions written on the packet so you can do it properly.

3- The Unbalanced pH Level of Water

To make your pool stairs stainless, you have to balance the pH level of your pool. Otherwise, it will damage your surface. When pH levels become low or high, it will be dangerous for your pool water in both conditions.  

The Unbalanced pH Level of Water

However, to make your pool water pH balanced, first of all, test the water through a test kit, which tells you that your pool water pH is unbalanced, and you should call the expert for the treatment of your pool water.

4- High Quantity of Zinc and Manganese in the Pool

The types of metals that can get into your pool incorporate manganese, zinc, iron, and copper. If there are corrupted shaded stains in the means, the source is reasonable metal.

Moreover, when the stains occur due to the high amount of Zinc and Manganese, it becomes difficult to remove them. So, call the experts to make your pool stainless and balance the water.

How to Clean Pool Steps?

Maintenance of the pool always puts your pool in a good and balanced condition. In the maintenance of the pool, pool steps are the main part to clean them.

However, pool steps get very common kinds of metal stains. It’s a kind of rust that is very light in colour but sticks to the pool steps. To clean your pool steps from these types of stains, use Ascorbic acid.

Using Ascorbic Acid

Using ascorbic acid is a pretty cool and easy technique. Just follow these steps to clean your pool steps.

  • Buy Vitamin C  and put some of it into a bowl. Crush it up into a powder.
  • Turn your pool pump off so that the water becomes nice and calm. After that, sprinkle the powder on the top step.
  • You will notice that the staining will go away in about thirty seconds. It’s a chemical reaction between the Ascorbic acid and the stains, which helps to make your pool steps stainless.

When you sprinkle it on the top step, the Ascorbic acid will cascade down the steps and generally works very well to get rid of one hundred per cent of the staining. It is one of the cheapest and easy techniques to clean pool steps.

Why is my Pool Brown?

There are a lot of questions in your mind related to your brown pool. Like why did my pool water turn brown after I coordinated or shocked the pool? However, the answer is very simple.

It is more than likely what you have is a mental problem. These metals are mainly copper and iron in your swimming pool. The solution to this problem is to take a pool water sample and analyze it to get exact information about the culprit.

Why is my Pool Brown

The thing which you need to solve this problem is Metal Sequestering. Sequestrants don’t remove metals from the water. Instead, they hold it in the solution until it can get filtered and back washed out. So, you want to keep it in solution.

Moreover, if it falls out of solution, that’s when you get the metal staining. It’s going to come up the pool surface or on the walls or the floor. So get a good metal sequestering. Use it as per given directions on it.

Brown Pool Water from Well

There are different causes of brown water, and we’ll tell you how to get rid of your brown well water. The most common issue is iron. Knowing why your well-water is brown is essential to understand how to get rid of brown well water.

However, your aquifer is the source of your well-water. It acts as a barrier to filter out contaminants into the water. Aquifers work by letting rainwater seep through the soil, which passes downwards.

After that, water meets a layer of sediment such as gravel, which filters out contaminants; after passing through the rocks, it reaches the aquifer’s water storage. So, here is the question why does water of well become contaminated? 

Well, a few things might be the reason for this happening. One of the main reasons for brown well-water is iron ore or maybe iron bacteria. A simple way to make iron disappear is by using a water softener system.

The water softener system cleans the magnesium and calcium through ion exchange. It is typically for hard water increased in pH hardness. However, a water softener system also removes iron from water and is an economical solution.

FAQs: Why Are My Pool Steps Turning Brown?

To get Brown Pool Water Clear, follow the given steps:

  1. Use Ascorbic Acid
  2. Turn off the pool Pump
  3. Use a 16oz bottle of Revive
  4. Clean up the debris
  5. Maintain properly

Yes, Baking Soda removes iron from pool water. Baking Soda is also known as Sodium Bicarbonate. It will raise both the pH and Alkalinity of your pool, improving stability and clarity. It is one of the main active ingredients to remove Iron from pool water.

Causes of Yellow stains on Pool steps are when the number of minerals increases in the water. It can begin to stain the pool. Yellow stains can also signify an excessive amount of iron in pool water.

Unlike algae, iron deposits resist scrubbing and take a lot of elbow grease to remove. A simple water test will confirm the presence of iron in your water.



As we have explained briefly, Why are my Pool Steps Turning Brown? By reading them, you will get different paths of knowledge on how to prevent your pool steps from turning in brown in a very popular and easiest way.

Moreover, the main cause of your brown pool steps is a high concentration of iron. The best way to remove these stains is to use iron stain remover or Algae cleaner. 

You can use a water filter, metal sequestrant, or drain your pool to prevent this problem. It’s that simple.