How To Clean an Above Ground Pool After Winter?
Summers are a lot of fun if you have a pool. But at the end of the winter season, you need to set up the pool and think about how to clean an above ground pool after winter? Well, you need not worry. We’ve got your back. If you leave the pool unattended for a whole season, the pool surface will start to crumble. So, it is important to maintain your pool to avoid such possibilities. Different methods are available to clean, like draining or using acids. In this article, you’ll get to know about how to clean an above ground pool after winter. Moreover, different other tips and tricks are waiting for you. So stay tuned and enjoy your read.
How to clean an above ground pool after winter
Cleaning an above ground pool after winter seems like a very hard job to do. But if you follow some steps and go with the flow, you’ll end up having a sparkling and shiny pool. So, follow these steps.
1- Remove the Pool Winter Cover
First, you need to remove the pool winter cover if you have placed it in winter. Be careful while doing it since you may need to avoid any debris on top of your pool cover into your above-ground pool. When the cover is removed, you can wash it with detergent and water. Make sure you can remove all the dust particles on your cover. Dry it completely before the store.
2- Check the Pool Thoroughly
After removing the cover, looks at your pool properly. See all the damaged sides of the pool like tears and holes. Make sure the pool pump is correct. Also, check the bottom of the pool.
3- Ensure Water Circulation
Due to some water circulation issues, algae spread quickly above the ground pool. Read our article on cleaning algae without vacuum. A dead spot is present because of bad circulation. Pool pumps circulate the water; it does not do a great job due to these dead spots. You can improve the condition by introducing multi-directional returns jets but carry pool brushes on hand to circulate water too manually.
4- Turn the Pump And Filter Back On
Pool pumps and filters are not used in the winter season. So, it is necessary to clean your pool pump and filter system before using it. You can easily check your pool equipment by following these guidelines:
- You can firstly remove any dirt that may have accumulated over the winter.
- Check all the elements around the cap by using a cartridge filter. If it looks damaged, you can replace it with a new cartridge filter.
- Remove the plugs on your pumps and open all valves. Check all the defects or leaks before running your pump.
- Ensure your pump runs for at least 4 to 5 hours to circulate your pool water and remove any debris that got inside your pool during winter.
5- Vacuum and Scrub the Pool
You can start vacuuming and scrubbing after the pool equipment is checked out. Clean the floor and wall of the pool smoothly and carefully.
6- Test the Water and Balance It
When the pump runs few hours, you can start testing your water chemistry. You can test it yourself by using testing kits and taking a water sample to your local pool shop. After checking the water test, results are obtained. You determine if you need to rebalance your pool water or not. Well-adjusted pool water avoids many diseases like skin and eye irritation and ensures that your pool is safe for you to use.
How To Balance Pool Water?
Balancing of pool ensure healthy pool. PH level, chlorine, calcium and alkalinity should be followed according to the below guidelines.
Balancing your pool water is important since it protects you from different skin problems and eye irritation when you’re in the pool. Moreover, it is healthy for your pool as well. So, a general guide for pool water is given.
Your swimming pool PH level should be between 7.2 and 7.4. You can increase your PH level by using soda ash and decreasing your pH level using sodium bisulfate.
The accurate range is 1ppm to 3ppm. Add liquid or granules to bring it up to normal level. After a few days, you may need more chlorine to keep its optimal level.
The accurate range is 150ppm to 50ppm. If water is too soft (not enough calcium), use calcium chloride to increase it.
Accurate value 80 to 120. To increase the value, use sodium bicarbonate (baking soda). To decrease the value, use muriatic acid.
How To Clean Intex Pool After Winter?
Intex pools are easy to manage when it comes to cleaning. Using simple methods, you can get rid of all the dirt and algae from the Intex pool. Read this complete guide to remove algae out of pool. We’ve written an easy-to-do step-by-step guide so you can enjoy your pool. You can follow these steps to clean the Intex pool
Firstly, you can determine which type of material is used to make your pool. If your pool is made up of vinyl, you must be used a cleaner with chlorine. It helps to disinfect and sanitize the pool bottom and wall. If you need pool cleaner for your vinyl pool then read out this article. Vacuum your pool by using a vacuum head on a telescopic pole. Check any debris left behind on the bottom of your Intex pool and remove it using a leaf skimmer.
2- Sanitizing and Disinfecting
Before opening the pool, take water from the filter pump and run it through the Intex pool for 24 hours. If you want to maintain the flow rate use liquid chlorine. The chlorine level should be at least 1to 3ppm.
3- Attacking and Dissolving
After vacuuming and sanitizing the pool, you may see some stains on your pool floor. Using a stiff brush and plastic scrubber, you can use muriatic acid or hydrogen peroxide to eliminate staining. We have separate article to remove algae stains from pool walls.
4- Clean with Pool Perfect and Bleach
If your pool is not cleaned using normal chemicals, you can use other strong cleaning chemicals like pool perfect, chlorine bleach, and muriatic acid to perfectly clean the walls and pool floor.
Cleaning of Intex pools after winter season is a tough job without proper steps. You have to remove pool cover, sanitizing and disinfecting, cleaning of pool and then proper testing.
Opening Pool After Winter Algae
Algae is produced in the pool due to poor water circulation, low flow, and a dead spot. Other reasons like poor water sanitation and the lack of chlorine levels also cause algae. To remove algae from the surface of the opening pool. You can apply algaecide to the water and use a pool scrub to scrub the pool surface covered in algae vigorously. For isolated algae bloom, you can use granular chlorine to treat it.
What Are Above Ground Pool Cleaning Hacks?
Here are some of the cleaning hacks you need to keep your above ground pool shiny and clean. These are easy-to-do steps that don’t require much of your time. But doing these will save a lot of your time.
Run The Pool Pump At Least 7 Hours A Day
Running the pool pump for 7 hours helps to improve water circulation and remove all the cinders and dust particles. Moreover, the water remains fresh even at the end because no chemical reactions can occur in flowing water. If you are in search of Best pool pump then read this.
Vacuum the Pool
An essential part of the above-ground pool is vacuuming. A vacuum head is connected to the skimmer and moves the vacuum head around the pool to collect leaves, debris, and other sediments present in the swimming pool.
Cleaning Above Ground Pool with Baking Soda
If your pool water is cloudy, it means the pH level is not to be maintained. To remove the cloudy above the ground pool, use baking soda to balance the pH level.
Test the Chlorine Level
Cloudy water above the ground pool is due to an imbalance of chlorine levels. You can use the strip to check the chlorine level and balance chlorine to clear cloudy water.
FAQs: How to Clean an Above Ground Pool After Winter?
When you see that your pool is covered with algae and leaves, you can use leaf baggers and leaf nets to remove the rubbles, algae, and leaf. You can repeat this process several times until the net comes up clean.
- Treat water to balance PH level, alkalinity, and chlorine.
- Use flocculants to make the grime particles drop on the bottom. you can also use a refiner to set defer particles
- You can also run the filter pump few hours until water is fully purified.
- Use vacuum by setting the multi-port filter value when your pool fills with water. It will help to lighten the blemish.
- You can try the above steps to clean your above-unattended pools and be ready for swimming.
Cleaning a pool after winters can be a tedious task, but all you need to do is arrange the pool. Clean the pool to get rid of leaves. Then set up the pump and filtration system and see if you need to use a chemical to clean the walls and floors of the pool.
After that, check the pH of the pool water and balance it. You’re good to go. Now you know how to clean a pool after winter.
We’ve given you a detailed answer to how to clean an above ground pool after winter. You can follow the steps mentioned above to get your pool clean and shiny to enjoy your summers. Make sure you do a deep cleaning after winters since it is necessary for your health and pool life. Water balancing and cleaning the pool floor and walls will increase the pool life. In addition to it, the pool should be free from contamination. You should be aware of any bacteria or mold growing in your pool. By following tips regarding how to clean an above ground pool after winter, you and your family can swim safely and enjoy.